Официальный дилер
MAGICMOTORSPORT в России
Пн—Пт, Сб, Вс 10:00—22:00
+7 (926) 211-81-11

Обновление Flex версии 3.4.0.0

FLEX release ver. 3.4.0.0 – Denso ECUs (with Renesas processor) are now available by OBD and bench modes!

This OBD & bench protocol is an exclusive of Flex, and can be considered an improvement of the bench protocol for Tricore-based BOSCH ECUs. Fast, safe and able to both tune and clone, this new solution will change the way most mechatronics work in their daily life.

At the moment we support many new ECUs – some of them are not even possible by any other protocol. It is also the first world solution for Volvo Denso with SH72543 processor (for example Volvo V40 2.0 T 2016): you can now tune them and clone them without even looking at the engine bay!

We are working to add more models with next updates!

OBD & Bench Denso Renesas

What is that?

The Renesas processors are usually found on japanese-built control units and are quite common more on japanese vehicles than on their western counterparts.

The most famous families are SH705x and SH725xx, which are widely used from 2005 to today. Denso is a ECU manufacturer that vastly uses Renesas processors. 

These OBD & bench protocols allow for full ECU access: both internal flash and internal EEPROM can be entirely read and written as a backup file for cloning and restoring purposes, and Flex allows to read and write maps directly, as well as calculate checksum for all the tuning enthusiasts.

At the moment the special protocol seems to work on specific ECUs, but we are constantly expanding our technology and we are already looking for some extra unit to add to the list. Stay tuned for more surprises!

Special features: 

Those are all exclusive protocols for Flex, never seen on X17 – and never seen at all in the field. High programming speed, combined with OBD mode – the most easy working method allow for faster, safer and more cost-efficient jobs, increasing considerably the quality of your workday. Some of these ECUs are too complicated to open and work in AUD or JTAG modes – in these cases, don’t open them, you do not even need to see the ECU – just Flex them!

Which software package should I purchase?

Most of those protocols (only exception are those dedicated to Kubota tractors) are free of charge for all owners of OBD/Bench protocols, and owners of X17 (upgrade can still be done for 195€ + VAT).

Contact the Sales Department via chat at www.magicmotorsport.com or send an email to info@magicmotorsport.com to purchase the OBD/Bench protocols for ECUs (car, bikes, vans) package (FLS0.1M/S) or the dedicated Renesas package (FLS0.6M/S), which will have in future also support for AUD mode and includes all protocols in OBD & bench mode as well: that will be ideal for any Renesas based control unit.

New protocols added:

  • Audi Bosch MED17.5.21 OBD UDS: Virtual Read/Write/Checksum Maps, Write Update (FRF)
  • Audi Continental Simos 12.1 TC1797 Boot: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write (for backup/restore)
  • Audi Continental Simos 12.2 TC1797 Boot: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write (for backup/restore)
  • Audi Continental Simos 18.1 TC1791 Boot: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write (for backup/restore)
  • Audi Continental Simos 18.2 TC1791 Boot: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write (for backup/restore)
  • Audi Continental Simos 18.3 TC1791 Boot: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write (for backup/restore)
  • Audi Continental Simos 18.6 TC1791 Boot: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write (for backup/restore)
  • BMW Continental MSD80 TC1796 Bench: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM 95640
  • BMW Continental MSD81 TC1796 Bench: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM 95640
  • BMW Continental MSD85 TC1796 Bench: Read/Write/Checksum Internal Flash, Read/Write External EEPROM 95128
  • BMW Continental MSD87 TC1796 Bench: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM 95128
  • BMW Continental MSV90 TC1796 Bench: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM
  • Dacia Bosch EDC17CP19 TC1766 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Dacia Bosch EDC17CP19 TC1766 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Ford Bosch EDC17CP65 TC1793 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Ford Bosch EDC17CP65 TC1793 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Hyundai Bosch ME17.9.11.1 TC1766 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Hyundai Bosch ME17.9.11.1 TC1766 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Kia Bosch ME17.9.11.1 TC1766 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Kia Bosch ME17.9.11.1 TC1766 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Kubota Denso SH72543 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore)
  • Kubota Denso SH72543 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Mazda Denso Pxxx SH72543 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Mazda Denso Pxxx SH72543 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Mazda Denso Sxx SH72546 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Mazda Denso Sxx SH72546 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Mazda Denso SHxx SH72543 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Mazda Denso SHxx SH72543 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Nissan Denso Pxxx SH72543 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore)
  • Nissan Denso Pxxx SH72543 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Porsche Siemens SDI3 TC1796 Boot: Read/Write/Checksum Internal Flash
  • Porsche Siemens SDI4 TC1796 Boot: Read/Write/Checksum Internal FlashPorsche Continental SDI10.2 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write External EEPROM 95256
  • Porsche Continental SDI10.4 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write External EEPROM 95256 
  • Porsche Continental SDI21.1 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Porsche Continental SDI21.2 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Renault Bosch EDC17CP19 TC1766 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Renault Bosch EDC17CP19 TC1766 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Saab Bosch EDC17CP19 TC1766 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Saab Bosch EDC17CP19 TC1766 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Seat Bosch MED17.5.21 OBD UDS: Virtual Read/Write/Checksum Maps, Write Update (FRF)
  • Seat Continental Simos 12.1 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Seat Continental Simos 12.2 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Seat Continental Simos 18.1 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Seat Continental Simos 18.3 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Skoda Bosch MED17.5.21 OBD UDS: Virtual Read/Write/Checksum Maps, Write Update (FRF)Skoda Continental Simos 12.1 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Skoda Continental Simos 12.2 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Skoda Continental Simos 18.1 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Skoda Continental Simos 18.2 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Skoda Continental Simos 18.6 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Subaru Denso 896xx SH72531 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Subaru Denso 896xx SH72531 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Toyota Denso Pxxx SH72543 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore)
  • Toyota Denso Pxxx SH72543 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore)
  • Toyota Denso 896xx SH72531 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore)
  • Toyota Denso 896xx SH72531 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore)Valtra
  • Bosch EDC17CV54 TC1797 Bench: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM
  • Valtra Bosch EDC17CV54 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write/Checksum Internal EEPROM 
  • Volkswagen (VW) Bosch MED17.5.21 OBD UDS: Virtual Read/Write/Checksum Maps, Write Update (FRF)
  • Volkswagen (VW) Continental Simos 12.1 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volkswagen (VW) Continental Simos 12.2 TC1797 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volkswagen (VW) Continental Simos 18.1 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volkswagen (VW) Continental Simos 18.2 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volkswagen (VW) Continental Simos 18.3 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volkswagen (VW) Continental Simos 18.6 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM
  • Volkswagen (VW) Continental Simos 18.7 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volkswagen (VW) Continental Simos 18.10 TC1791 Boot: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM 
  • Volvo Denso MB279700-9500 SH72543 OBD: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 
  • Volvo Denso MB279700-9500 SH72543 Bench: Read/Write/Checksum Maps, Read/Write Internal EEPROM, Full Read/Full Write Backup (for clone/restore) 

Bugfixes:

  • MB EDC17C43 OBD: fixed a writing issue
  • Renault EDC16CP33: reimplemented support for hw version 6.7 properly
  • VAG EDC16CP34 BDM: external flash writing error fixed

Software improvements:

  • Mercedes Bosch EDC17CP01 TC1796: added manual for second version (with inverted CANs)
  • VAG Continental DL501 Gen2 Bench: added new CRC
  • OBD mode: general improvement
  • GUI: added Korean language
  • GUI: added Portoguese language
  • GUI: added Russian language
  • Tutorial: now can be done without connecting the tool
  • Vehicle list: general improvement

Другие новостивсе новости
Обновление MAGPro2 X17 версии 10.30.00

X17 v10.30.00 наконец то вышло – сейчас мы можем назвать это волшебным обновлением! Пять основных моментов этого обновления x17 совершенно новые реш......

Завершение производства TCU-Manager
Внимание, продукция TCU Manager снята с производства и обновляться больше не будет, в связи с этим предусмотрен переход на MAGPro2 X17 с вычетом из его сто......
Обновление MAGPro2 X17 версии 10.50.00

Выпущено обновление MAGPro2 X17 версии 10.50.00

Мы добавили 439 автомобилей в этом релизе.

  1. Добавлена ......
Обновление MAGPro2 X17 версии 10.60.00

Это первое обновление в 2017 году в котором мы уделили внимание поддержке блоков VAG DELPHI DCM6.2V которые теперь доступны для чтения и записи по пр......

Обновление MAGPro2 X17 версии 12.08.00

Standard release for MG1/MD1 BMW + some new protocols and several bug fixes, while we go towards release of Flex.

New Protocols......

Обновление MAGPro2 X17 версии 12.07.00

This is a historical date – as finally vehicles using the 3,5 V6 Ecoboost engine now are available for tuning.
Those MY2016-2017-2018 MEDC17 ECU......

Обновление MAGPro2 X17 версии 12.06.00

We are releasing ver 12.06.00 of MAGPro2 X17: this update, aside several software improvements, focuses on two importa......

Обновление MAGPro2 X17 версии 12.05.00

After having kept you waiting for the BMW Exx OBD solution for so long, we have decided to add an extra surprise to this Easter update ......

Обновление MAGPro2 X17 версии 12.04.00

Our last release of the year is here – alongside our best wishes for those Christmas and New Year holidays, we also wish to improve your business thanks......

Обновление BMW Fxx FLASHER версии 01.01.07

From today we provide SLAVE version of BMW Fxx Flasher, for 990€ + VAT!

Every master owner of slaves will have to purchase a SL......

Чип-тюнинг BMW Fxx и Mini Fxx через OBD

Выпущено новое революционное решение для программирования ECU автомобилей BMW Fxx серий и Mini непосредственно чер......

Обновление MAGPro2 X17 версии 12.2.10

A new MAGPro2 X17 release is here, bringing with it some very important promised protocols (such as clone/restore of MSD8x and ......

Обновление MAGPro2 X17 версии 12.01.00

Not long after our last impressive update, we have finally released something we have had under our sleeves for a while now.
After presenting it as......

Обновление MAGPro2 TCU Manager версии 12.00.02

The summer holidays are over and we hope you have had your R&R and are ready to get back to work because we definitely are! We have prepared an inte......

Обновление MAGPro2 T-BOOT версии 12.00.03

The summer holidays are over and we hope you have had your R&R and are ready to get back to work because we definitely are! We have prepared an inte......

Обновление MAGPro2 X17 версии 12.00.00

С гордостью представляем наш революционное решение для работы с блоками VAG Simos.


Что это значит? ......

Выставка Автомеханика Москва 2017

Головной офис компании Magcmotorsport будет присутствовать на выставке Автомеханика 2017 в Москве. Мы приглашаем посетить наш стенд на выставке Авто......

Обновление MAGPro2 X17 версии 10.80.00

Добавлена поддержка чтения и записи калибровок в коробки передач ZF 8HP для Audi, Volkswagen и Bentiey, 7-ступенчатых коробок P......

TCU MANAGER возвращается в бизнес

Продукт TCU MANAGER возвращается с поддержкой и КОПИРОВАНИЯ и ВОССТАНОВЛЕНИЯ всех новых блоков КПП, теперь компании по ремонту и обслуживанию коробок......

Обновление MAGPro2 X17 версии 10.70.00

Мы добавили поддержку блока EDC17C84_V2. Этот ECU имеет новое программное обеспечение, отличное от уже поддерживаемого нами EDC17C84 — мы, наконец, нашл......

Обновление MAGPro2 X17 версии 10.40.00

После долгих недель тяжелой работы и тестирования… Вышел наш новый релиз, полный сюрпризов. Давайте посмотрим что мы сделали: В последнем обновлении......

Выпущен пакет Flex - Bench BOSCH MEDC17

To work on most BOSCH MEDC17 engine control units in Bootloader mode, it is necessary to open the ECU, connect to ......

Обновление Flex версии 2.00.00

Please note you will need last version of one of the following browsers to run Flex:

  • Google Chrome (recommended)
  • Mozill......
Обновление Flex версии 2.1.00

Dear customers,

Considering priorities and your own interests, we decided to delay a little bit BDM protocol release to provide you something mo......

Обновление оборудования MAGPro2 X17 на Flex
Для всех владельцев приборов MagPro2 X17, компания организует обмен на программатор FLEX. Где за небольшую плату в 195 евро (без стоимости доставки) Вы пол......
Обновление MAGPro2 X17 версии 12.09.00

Here we are with a new MAGPro2 X17 update!

Besides the most important news – Mercedes MEDC17 by OBD – ......

Обновление Flex версии 2.2.0.0

As every year, our Christmas release is here!

This time Santa brought you huge updates for both your favourites tools.
He......

Теперь Flex доступен в SLAVE версии

Now all MAGPro2 X17 users can upgrade to FLEX.


MAGPro2 X17 SLAVE customers can also request to upgrade to FLEX at the special price......

Обновление Flex версии 3.1.0.0

FLEX release 3.1.0.0 is out, alongside FLEX’s first batch of OBD protocols!

MAGICMOTORSPORT is proud to anno......

Добавлена поддержка Flex - OBD MEDC17 Mercedes

FLEX release ver. 3.2.0.0 – OBD MEDC17 Mercedes is now available

This OBD protocol has been improved since its first appearance in MA......

Обновление Flex версии 3.0.0.0

FLEX release 3.0.0.0 includes new protocols and big news: Your subs have run out? FLEX keeps working!

Обновление Flex версии 3.3.0.0

Flex ver 3.3.0.0 released: Solutions for EDC17CP50, MED17.9.7, MED17.7.7

With FLEX you no longer open the engine control ......

Обновление Flex версии 3.4.0.0

FLEX release ver. 3.4.0.0 – Denso ECUs (with Renesas processor) are now available by OBD and bench modes!

This OBD & be......

Новые услуги для грузовых автомобилей

New HELPDESK services available for heavy vehicles!

The MAGICMOTORSPORT Helpdesk is now offering new services to our user......

Обновление Flex версии 3.5.0.0

Another Flex release is out with many interesting news: Flex ver 3.5.0.0


First of all is the addition of the ISN reading function by O......

Обновление Flex версии 3.6.0.0

Flex ver 3.6.0.0 release

A new update is available now with more than a thousand vehicles added. We implemented the protocols for ......

Обновление Flex версии 3.7.0.0

Flex ver 3.7.0.0 released


New OBD, Bench Renesas, Bench Tricore and TCU protocols
An update for Kubota tractors and Toyota vehicles<......

Обновление Flex версии 3.8.0.0

Flex ver 3.8.0.0 released

Our release is out: a lot of focus has been put on MEDC17 ECUs in the last few weeks, which are ......

Обновление Flex версии 3.9.0.0

Flex версии 3.9.0.0 – поддерживает MDG1

Новое поколение блоков управления Bosch MD1 и MG1, доступны для работы с FLEX

Мы выпусти......