Официальный дилер
MAGICMOTORSPORT в России
Пн—Пт, Сб, Вс 10:00—22:00
+7 (926) 211-81-11

Обновление MAGPro2 X17 версии 12.01.00

Not long after our last impressive update, we have finally released something we have had under our sleeves for a while now.
After presenting it as a prototype in trading fairs around the world, our solution to drill the BMW MEVD17.2.4, MEVD17.2.5, MEVD17.2.8, MEVD17.2.9, MEVD17.2.H and MEVD17.2.P is finally ready for distribution!

Our new drilling tool is the safest and most professional solution to be able to read and write these ECUs in bootloader, which can then be unlocked in boot for OBD write.

The caps are built to exactly match the drilled area, maintaining the ECU 100% intact.

Hey, hey – don’t close this yet! That’s not all we have in store for you – we have just now released some great services, such as VAG SIMOS PCR2.1 CLONE solution, available for all X17 & T-BOOT Customers for free (10 green coins), and a bunch of new AdBlue solutions for EURO 6 trucks and tractors.

What else?

Aside for several minor improvements to our software, we have finally released the secret equipment that every tuner in the world should endorse.

In conclusion, as a special gift to our customers in Asia, who we were greatly satisfied to meet during last month’s MMS Shanghai Training Week, we have developed and released our exclusive solution to read the password on ME17.8.8 ECUs, mounted on Great Wall, Chery, Lifan and MG vehicles.

Enjoy our new update – and stay tuned for the next MAGIC news!

New Protocols Added:

  • Chery Bosch ME17.8.8 TC1728: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Recovery, Pass Read
  • Citroen Bosch EDC17C10 TC1796: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Checksum/Recovery, Bootloader XROM Read/Write/Checksum/Recovery
  • Ford Delphi DCM6.1 TC1797 Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Recovery
  • Great Wall Bosch ME17.8.8 TC1728 Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Recovery, Pass Read
  • Hyundai Bosch ME17.9.1 TC1796: Tricore Pass read protocol implemented
  • Kia Bosch ME17.9.1 TC1796: Tricore Pass read protocol implemented
  • Lifan Bosch ME17.8.8 TC1728 Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Recovery, Pass Read
  • MG Bosch ME17.8.8 TC1767 Pass Read
  • Peugeot Bosch EDC17C10 TC1796: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Checksum/Recovery, Bootloader XROM Read/Write/Checksum/Recovery

New Functions Available by SW:

  • Acura ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Chrysler ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Dodge ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Fiat ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Ford Continental SID209 OBD UDS: added support for newer models
  • Honda ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Jeep ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Land Rover ZF 9HP TC1782 Bootloader IROM: added support for new file type
  • Mercedes Continental SID307 TC1767 Pass Read: added support for new type
  • Nissan Continental EMS3155 TC1782 Pass Read: added support for new type
  • Nissan Continental SID307 TC1767 Pass Read: added support for new type
  • Nissan Continental SID309 TC1767 Pass Read: added support for new type
  • Opel Continental SID309 TC1767 Pass Read: added support for new type
  • Renault Continental EMS3155 TC1782 Pass Read: added support for new type
  • Renault Continental SID307 TC1767 Pass Read: added support for new type
  • Renault Continental SID309 TC1767 Pass Read: added support for new type
  • Vauxhall Continental SID309 TC1767 Pass Read: added support for new type
  • Volvo Continental SID807EVO TC1797 Pass Read: added support for new type

X17 bugfixes:

  • Audi Direct Shift Gearbox 7 Speed Dry Clutch Temic DQ200Dxx: simplified and joined map protocols, bug fixed on OBD KLINE connection mode
  • Audi Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Cxx: fixed mod writing bug
  • Audi Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Exx: simplified and joined map protocols
  • Audi Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Fxx: simplified and joined map protocols
  • BMW Continental MSV90 CLONE/RESTORE: bug fixed which didn’t allow proper clone of some ECUs
  • Ford Bosch EDC17C70 Pass Read: bug fixed which didn’t allow to read password in several ECU types
  • General: various CRC problems fixed (VAG MEDC17 / Renault Continental and Siemens especially)
  • Mercedes Bosch MED17.7.3.1 TC1797 BL XROM: solved a bug which didn’t allow identification of memory
  • Rolls Royce Continental MSV90 CLONE/RESTORE: bug fixed which didn’t allow proper clone of some ECUs
  • Seat Direct Shift Gearbox 7 Speed Dry Clutch Temic DQ200Dxx: simplified and joined map protocols, bug fixed on OBD KLINE connection mode
  • Seat Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Cxx: fixed mod writing bug
  • Seat Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Exx: simplified and joined map protocols
  • Seat Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Fxx: simplified and joined map protocols
  • Skoda Direct Shift Gearbox 7 Speed Dry Clutch Temic DQ200Dxx: simplified and joined map protocols, bug fixed on OBD KLINE connection mode
  • Skoda Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Exx: simplified and joined map protocols
  • Skoda Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Fxx: simplified and joined map protocols
  • Volkswagen Direct Shift Gearbox 7 Speed Dry Clutch Temic DQ200Dxx: simplified and joined map protocols, bug fixed on OBD KLINE connection mode
  • Volkswagen Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Cxx: fixed mod writing bug
  • Volkswagen Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Exx: simplified and joined map protocols
  • Volkswagen Direct Shift Gearbox 6 Speed Wet Clutch Temic DQ250Fxx: simplified and joined map protocols

New Services Available by MMS Helpdesk:

  • DPF+EGR OFF: Service (all in one) implemented. Cost starts at 20 green coins.
  • ARTEC EURO 6 EDC17CV52: DPF and AdBlue OFF services available
  • Citroen Bosch EDC17C60: DPF, EGR and AdBlue OFF services available
  • DAF EURO 6 Delphi ETC3: DPF and AdBlue OFF services available
  • Deutz EURO 6 EDC17CV52: DPF and AdBlue OFF services available
  • Deutz EURO 6 EDC17CV54: DPF and AdBlue OFF services available
  • Deutz EURO 6 EDC17CV56: DPF and AdBlue OFF services available
  • Fendt EURO 6 EDC17CV52: DPF and AdBlue OFF services available
  • Ford Continental SID209: DPF, EGR and AdBlue OFF services available
  • Iveco EURO 6 Bosch EDC17CV41: DPF and AdBlue OFF services available
  • MAN EURO 6 Bosch EDC17CV42: DPF and AdBlue OFF services available
  • Massey Ferguson EURO 6 EDC17CV44: DPF and AdBlue OFF services available
  • Massey Ferguson EURO 6 EDC17CV52: DPF and AdBlue OFF services available
  • Massey Ferguson EURO 6 EDC17CV54: DPF and AdBlue OFF services available
  • Peugeot Bosch EDC17C60: DPF, EGR and AdBlue OFF services available
  • Tractors EURO 6 EDC17CV41: DPF and AdBlue OFF services available
  • VAG SIMOS PCR2.1 CLONE: Service implemented. Cost is 10 green coins.
Другие новостивсе новости
Обновление MAGPro2 X17 версии 10.30.00

X17 v10.30.00 наконец то вышло – сейчас мы можем назвать это волшебным обновлением! Пять основных моментов этого обновления x17 совершенно новые реш......

Завершение производства TCU-Manager
Внимание, продукция TCU Manager снята с производства и обновляться больше не будет, в связи с этим предусмотрен переход на MAGPro2 X17 с вычетом из его сто......
Обновление MAGPro2 X17 версии 10.50.00

Выпущено обновление MAGPro2 X17 версии 10.50.00

Мы добавили 439 автомобилей в этом релизе.

  1. Добавлена ......
Обновление MAGPro2 X17 версии 10.60.00

Это первое обновление в 2017 году в котором мы уделили внимание поддержке блоков VAG DELPHI DCM6.2V которые теперь доступны для чтения и записи по пр......

Обновление MAGPro2 X17 версии 12.08.00

Standard release for MG1/MD1 BMW + some new protocols and several bug fixes, while we go towards release of Flex.

New Protocols......

Обновление MAGPro2 X17 версии 12.07.00

This is a historical date – as finally vehicles using the 3,5 V6 Ecoboost engine now are available for tuning.
Those MY2016-2017-2018 MEDC17 ECU......

Обновление MAGPro2 X17 версии 12.06.00

We are releasing ver 12.06.00 of MAGPro2 X17: this update, aside several software improvements, focuses on two importa......

Обновление MAGPro2 X17 версии 12.05.00

After having kept you waiting for the BMW Exx OBD solution for so long, we have decided to add an extra surprise to this Easter update ......

Обновление MAGPro2 X17 версии 12.04.00

Our last release of the year is here – alongside our best wishes for those Christmas and New Year holidays, we also wish to improve your business thanks......

Обновление BMW Fxx FLASHER версии 01.01.07

From today we provide SLAVE version of BMW Fxx Flasher, for 990€ + VAT!

Every master owner of slaves will have to purchase a SL......

Чип-тюнинг BMW Fxx и Mini Fxx через OBD

Выпущено новое революционное решение для программирования ECU автомобилей BMW Fxx серий и Mini непосредственно чер......

Обновление MAGPro2 X17 версии 12.2.10

A new MAGPro2 X17 release is here, bringing with it some very important promised protocols (such as clone/restore of MSD8x and ......

Обновление MAGPro2 X17 версии 12.01.00

Not long after our last impressive update, we have finally released something we have had under our sleeves for a while now.
After presenting it as......

Обновление MAGPro2 TCU Manager версии 12.00.02

The summer holidays are over and we hope you have had your R&R and are ready to get back to work because we definitely are! We have prepared an inte......

Обновление MAGPro2 T-BOOT версии 12.00.03

The summer holidays are over and we hope you have had your R&R and are ready to get back to work because we definitely are! We have prepared an inte......

Обновление MAGPro2 X17 версии 12.00.00

С гордостью представляем наш революционное решение для работы с блоками VAG Simos.


Что это значит? ......

Выставка Автомеханика Москва 2017

Головной офис компании Magcmotorsport будет присутствовать на выставке Автомеханика 2017 в Москве. Мы приглашаем посетить наш стенд на выставке Авто......

Обновление MAGPro2 X17 версии 10.80.00

Добавлена поддержка чтения и записи калибровок в коробки передач ZF 8HP для Audi, Volkswagen и Bentiey, 7-ступенчатых коробок P......

TCU MANAGER возвращается в бизнес

Продукт TCU MANAGER возвращается с поддержкой и КОПИРОВАНИЯ и ВОССТАНОВЛЕНИЯ всех новых блоков КПП, теперь компании по ремонту и обслуживанию коробок......

Обновление MAGPro2 X17 версии 10.70.00

Мы добавили поддержку блока EDC17C84_V2. Этот ECU имеет новое программное обеспечение, отличное от уже поддерживаемого нами EDC17C84 — мы, наконец, нашл......

Обновление MAGPro2 X17 версии 10.40.00

После долгих недель тяжелой работы и тестирования… Вышел наш новый релиз, полный сюрпризов. Давайте посмотрим что мы сделали: В последнем обновлении......