Официальный дилер
MAGICMOTORSPORT в России
Пн—Пт, Сб, Вс 10:00—22:00
+7 (926) 211-81-11

Обновление MAGPro2 X17 версии 12.07.00

We have a lot of hot new protocols which you have been waiting for years.
First in the list are the newest bosch engine control unit type, MG1 and MD1.

From today it is finally possible to access them in OBD mode for the models mounted on BMW, Ford, Lincoln and Rolls Royce.

This is a historical date – as finally vehicles using the 3,5 V6 Ecoboost engine now are available for tuning.
Those MY2016-2017-2018 MEDC17 ECUs with new password protection (error 7F 31 33) will be no longer a problem now, as they can be shipped to our lab in Italy to read password. Solution works for all brands and is free of charge for X17 owners.
OBD solution for BMW MG1CSxxx and MD1CPxxx/CSxxx ECUs is already available on request – just open a support ticket to request access to this protocol.

Casting aside the most waited control units of the year 2017 and 2018, our update still has a lot to offer:

The new 1.0 TSI from VAG are available by OBD (MED17.1.27), and Jaguar and Land Rover (MY2017-2018) using MED17.8.32 will be now supported in Bench mode by pinout.
BMW ZF 8HP is now available for Fxx series, with a clone and a virgin function as well for who is not interested in tuning them. Procedure is, as usual, by pinout – tuning via OBD directly. As requested by many, PSA DCM6.2A OBD protocol has been added as well as some older protocols to ensure a better compatibility of X17 for specific markets.

Last but not least, a gift sent to our customers waiting for us in Atlanta for the next trade show: GPEC2 and GPEC2A full bootloader protocol for FCA group.

Check below the complete list of the protocols and improvements added to this release:

New Protocols Added:

  • Bentley Bosch MED17.1.62 MASTER & SLAVE: Virtual Read/Write/Checksum/Recovery
  • BMW Bosch ME17.2.4 TC1793: Bootloader EEPROM Read/Write/Recovery
  • BMW Fxx ZF 8HP: OBD UDS Read/Write/Checksum/Recovery/Restore ORI/Restore CAFD, Virgin (on bench, needs coding by ISTA afterwards), Clone/Restore Full Read/Full Write**
  • Chrysler Continental GPEC2 MPC5566: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM 25C320 Read/Write/Recovery
  • Chrysler Continental GPEC2A SPC5674F: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM 25C320 Read/Write/Recovery
  • Citroen Bosch M7.4.4: OBD Kline Read/Write/Checksum/Recovery
  • Citroen Bosch ME7.4.4: OBD Kline Read/Write/Checksum/Recovery
  • Citroen Bosch ME7.4.5: OBD Kline Read/Write/Checksum/Recovery
  • Citroen Delphi SPC5674F DCM6.2A: OBD Read/Write/Checksum/Recovery
  • Citroen Marelli 9DF: OBD UDS Virtual Read/Write/Checksum/Recovery
  • Dodge Continental GPEC2 MPC5566: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM Read/Write/Recovery
  • Dodge Continental GPEC2A SPC5674F: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM 25C320 Read/Write/Recovery
  • DS Delphi SPC5674F DCM6.2A: OBD Read/Write/Checksum/Recovery
  • Fiat Continental GPEC2 MPC5566: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM Read/Write/Recovery
  • Ford Bosch MED17.0.7 OBD: Read/Write/Checksum/Recovery
  • Ford Bosch MG1CS015: OBD Read/Write/Checksum/Recovery
  • Ford Siemens SID 804: OBD KWP Read/Write/Checksum/Recovery
  • Ford Siemens SID901: OBD KWP Read/Write/Checksum/Recovery
  • Ford Visteon DCU 102: OBD KWP Read/Write/Checksum/Recovery
  • Hino Denso (Kubota engine) SH7058/7059: Bench Read/Write/Checksum/Recovery
  • Isuzu Bosch EDC17C83 TC1793: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Recovery
  • Jaguar Bosch MED17.8.32: Bench Read/Write/Checksum/Recovery
  • Jeep Continental GPEC2 MPC5566: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM Read/Write/Recovery
  • Jeep Continental GPEC2A SPC5674F: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM 25C320 Read/Write/Recovery
  • Kia Continental SIM2K-250 TC1782 & TC1724: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write/Recovery, Backup/Restore*
  • Lancia Continental GPEC2 MPC5566: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM Read/Write/Recovery
  • Land Rover Bosch MED17.8.32: Bench Read/Write/Checksum/Recovery
  • Lincoln Bosch MG1CS015: OBD Read/Write/Checksum/Recovery
  • Mercedes Bosch ME17.7 TC1796: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader XROM Spansion CD016G Read/Write/Checksum/Recovery
  • Peugeot Bosch M7.4.4: OBD Kline Read/Write/Checksum/Recovery
  • Peugeot Bosch ME7.4.4: OBD Kline Read/Write/Checksum/Recovery
  • Peugeot Bosch ME7.4.5: OBD Kline Read/Write/Checksum/Recovery
  • Peugeot Delphi SPC5674F DCM6.2A: OBD Read/Write/Checksum/Recovery
  • Peugeot Marelli 9DF: OBD UDS Virtual Read/Write/Checksum/Recovery
  • Porsche Aisin AL1000: OBD UDS Virtual Read/Write/Checksum/Recovery
  • Porsche Continental SDI21.2 TC1791: Bootloader Maps Read/Write/Checksum/Recovery, Bootloader EEPROM Read/Write, Bootloader Backup/Restore (MAGP1.18 is required)
  • Rolls Royce ZF 8HP: OBD UDS Read/Write/Checksum/Recovery/Restore ORI/Restore CAFD, Virgin (on bench, needs coding by ISTA afterwards), Clone/Restore Full Read/Full Write**
  • Seat Bosch MED17.1.27: OBD UDS Virtual Read/Write/Checksum/Recovery
  • Skoda Bosch MED17.1.27: OBD UDS Virtual Read/Write/Checksum/Recovery
  • Troller Siemens SID 901: OBD KWP Read/Write/Checksum/Recovery
  • Volkswagen (VW) Bosch MED17.1.27: OBD UDS Virtual Read/Write/Checksum/Recovery
  • Volkswagen (VW) Continental GPEC2 MPC5566: Bootloader IROM Read/Write/Checksum/Recovery, Bootloader External EEPROM Read/Write/Recovery
  • Volkswagen (VW) Marelli 9GV SPC563M64 (South American market): Bootloader IROM Read/Write/Checksum/Recovery, Bootloader EEPROM 95320 Read/Write/Recovery

Software Improvements:

  • BMW Bosch EDC17CP02 OBD KWP: protocol improved
  • Mercedes Delphi CRD3.xx TC1797 OBD UDS: added support for new type of ECU
  • MAGPro2 X17 GUI: now will give information about clone procedures requiring MMS Helpdesk system directly on protocol description.
  • Opel Delco E78 BL: Added support for new hardware type (manual updated)

New Services available by MMS Helpdesk:

  • FAL MED17.3.5 TC1793 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.
  • VAG EDC17C74 TC1793 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.
  • VAG EDC17CP74 TC1793 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.
  • VAG EDC17CP54 TC1793 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.
  • VAG MED17.1.62 TC1797 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.
  • VAG MED17.5.21 TC1782 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.
  • VAG MED17.5.25 TC1782 Pass Read: it is now possible to unlock ECU to read new TPROT password by sending ECU to MAGICMOTORSPORT Italy lab. ECU will be reshipped in 48h max with bootloader read and password. Only shipment costs will be charged.

Bugfixes:

  • Citroen Delphi DCM3.4 OBD: writing issue for some vehicles fixed
  • Daihatsu Denso 896xx ALL: fixed writing issue (authorization error) that occurred on some vehicles. It will work fine by OBD now.
  • Hino Denso 896xx ALL: fixed writing issue (authorization error) that occurred on some vehicles. It will work fine by OBD now.
  • Lexus Denso 896xx ALL: fixed writing issue (authorization error) that occurred on some vehicles. It will work fine by OBD now.
  • Mercedes Bosch ME9.7: writing issue fixed for some files
  • Opel Delco E78: file readout size fixed
  • Peugeot Delphi DCM3.4 OBD: writing issue for some vehicles fixed
  • Toyota Denso 896xx ALL: virtual read improved
  • Toyota Denso 896xx ALL: fixed writing issue (authorization error) that occurred on some vehicles. It will work fine by OBD now.
  • VAG Bosch EDC17CP14 OBD UDS: crashing issue while loading some files resolved

* Function only available for now to have a backup in case of issues. Clone or extraction of files is not possible yet due to security reasons.

** Gearboxes must have software compatibility (BTLD & SWFLP must match)

Другие новостивсе новости
Обновление MAGPro2 X17 версии 10.30.00

X17 v10.30.00 наконец то вышло – сейчас мы можем назвать это волшебным обновлением! Пять основных моментов этого обновления x17 совершенно новые реш......

Завершение производства TCU-Manager
Внимание, продукция TCU Manager снята с производства и обновляться больше не будет, в связи с этим предусмотрен переход на MAGPro2 X17 с вычетом из его сто......
Обновление MAGPro2 X17 версии 10.50.00

Выпущено обновление MAGPro2 X17 версии 10.50.00

Мы добавили 439 автомобилей в этом релизе.

  1. Добавлена ......
Обновление MAGPro2 X17 версии 10.60.00

Это первое обновление в 2017 году в котором мы уделили внимание поддержке блоков VAG DELPHI DCM6.2V которые теперь доступны для чтения и записи по пр......

Обновление MAGPro2 X17 версии 12.08.00

Standard release for MG1/MD1 BMW + some new protocols and several bug fixes, while we go towards release of Flex.

New Protocols......

Обновление MAGPro2 X17 версии 12.07.00

This is a historical date – as finally vehicles using the 3,5 V6 Ecoboost engine now are available for tuning.
Those MY2016-2017-2018 MEDC17 ECU......

Обновление MAGPro2 X17 версии 12.06.00

We are releasing ver 12.06.00 of MAGPro2 X17: this update, aside several software improvements, focuses on two importa......

Обновление MAGPro2 X17 версии 12.05.00

After having kept you waiting for the BMW Exx OBD solution for so long, we have decided to add an extra surprise to this Easter update ......

Обновление MAGPro2 X17 версии 12.04.00

Our last release of the year is here – alongside our best wishes for those Christmas and New Year holidays, we also wish to improve your business thanks......

Обновление BMW Fxx FLASHER версии 01.01.07

From today we provide SLAVE version of BMW Fxx Flasher, for 990€ + VAT!

Every master owner of slaves will have to purchase a SL......

Чип-тюнинг BMW Fxx и Mini Fxx через OBD

Выпущено новое революционное решение для программирования ECU автомобилей BMW Fxx серий и Mini непосредственно чер......

Обновление MAGPro2 X17 версии 12.2.10

A new MAGPro2 X17 release is here, bringing with it some very important promised protocols (such as clone/restore of MSD8x and ......

Обновление MAGPro2 X17 версии 12.01.00

Not long after our last impressive update, we have finally released something we have had under our sleeves for a while now.
After presenting it as......

Обновление MAGPro2 TCU Manager версии 12.00.02

The summer holidays are over and we hope you have had your R&R and are ready to get back to work because we definitely are! We have prepared an inte......

Обновление MAGPro2 T-BOOT версии 12.00.03

The summer holidays are over and we hope you have had your R&R and are ready to get back to work because we definitely are! We have prepared an inte......

Обновление MAGPro2 X17 версии 12.00.00

С гордостью представляем наш революционное решение для работы с блоками VAG Simos.


Что это значит? ......

Выставка Автомеханика Москва 2017

Головной офис компании Magcmotorsport будет присутствовать на выставке Автомеханика 2017 в Москве. Мы приглашаем посетить наш стенд на выставке Авто......

Обновление MAGPro2 X17 версии 10.80.00

Добавлена поддержка чтения и записи калибровок в коробки передач ZF 8HP для Audi, Volkswagen и Bentiey, 7-ступенчатых коробок P......

TCU MANAGER возвращается в бизнес

Продукт TCU MANAGER возвращается с поддержкой и КОПИРОВАНИЯ и ВОССТАНОВЛЕНИЯ всех новых блоков КПП, теперь компании по ремонту и обслуживанию коробок......

Обновление MAGPro2 X17 версии 10.70.00

Мы добавили поддержку блока EDC17C84_V2. Этот ECU имеет новое программное обеспечение, отличное от уже поддерживаемого нами EDC17C84 — мы, наконец, нашл......

Обновление MAGPro2 X17 версии 10.40.00

После долгих недель тяжелой работы и тестирования… Вышел наш новый релиз, полный сюрпризов. Давайте посмотрим что мы сделали: В последнем обновлении......